Cura1 LED Pager – In-Home Care – 3508

Description

What is the Cura1 LED Pager?

The Cura1 LED Pager (3508) is a compact wireless receiver that monitors up to three Cura1 cordless devices, including bed and chair pads, floor mats, wireless call buttons and iBeam sensors. Safe-Life supplies the pager ready for use in home care, aged-care and hospital settings across Australia, offering vibration and tone-based alerting for fast response.

How does the Cura1 LED Pager work?

1. Each wireless device pairs with the pager using the 433.92 MHz frequency.
2. The pager alerts using vibration and selectable tones (low tone, silent vibration only, or high tone).
3. When a device triggers, the corresponding LED lights and the status LED blinks red every 7 seconds until reset .
4. The CANCEL button resets the alarm when held for approximately one second.
5. When used with transmitters 2719 or 2720, the pager supports automatic reset.

Who is this pager for?

• Carers monitoring residents who may leave their bed or chair unexpectedly
• Home users needing simple alerting without installing a full nurse call system
• Aged-care facilities wanting portable, easy-to-clean alerting devices
• Hospitals needing a reliable vibration/tone pager for rapid response

What’s included in the box?

• Cura1 LED Pager (3508)
• 2 x AA batteries (alkaline)
• Belt clip
• QuickStart guide

Technical Specifications

Compatibility

The Cura1 LED Pager works with the Cura1 433 MHz wireless range, including:

• Cura1 Wireless Pad Transmitter 2719
• Cura1 Universal Pad Transmitter 2720
• Cura1 bed and chair exit pads
• Cura1 cordless floor mats
• Cura1 iBeam PIR sensor (2721)
• Cura1 wireless door magnetic switch (3503)
• Cura1 wireless call buttons and PET transmitters

Why choose this Safe-Life product?

• Pairs with up to three Cura1 wireless devices
• Simple programming using PROGRAM and CANCEL buttons
• Clear status LEDs and vibration-tactile alerts for noisy environments
• Designed for Australian aged-care, home care and hospitals
• 12-month warranty and local support through Safe-Life Australia

Frequently Asked Questions

How do I change the alert tone?

Press the VOLUME button to cycle through low tone + vibration, silent vibration only or high tone + vibration.

How do I reset an alarm?

Hold the CANCEL button for approximately one second until the alert stops.

How do I know if the batteries are low?

The status LED flashes red when the batteries need replacement.

How do I pair a device with the pager?

Enter Programming Mode by holding PROGRAM until the status LED turns solid green, then trigger the transmitter. The LED for Device 1, 2 or 3 will flash twice to confirm pairing.

Does the pager need a nurse call system?

No, it can operate completely standalone with Cura1 wireless pads, mats and call buttons.