Archives
-
Safe Life Hardwired Bed Pad Kit – For Facilities
|
1 minuteIn an aged care facility the the Safe life monitor would normally be set for silent and as the resident lifts themselves off the bed care staff will be notified via the facility’s nurse call system. As the resident is returned to the bed the system will automatically re-arm making less work for the carer and not…
-
Cura1 Hardwired Monitor – For Bed, Chair & Floor Pads – 2701
|
1 minuteThis low cost monitor is an optional accessory for hardwired floor sensor mat use but is essential for hardwired bed (A-BPLB-01) and chair (A-BPSC-01) exit sensor pads. Pause mode to attend to a patient without triggering alarm. Tamper proof reset option using magnetic caregiver key. Choice of tone, and volume control for alarm. 0, 2s,…
-
Cura1 Hardwired Chair Pad – 2628
|
1 minuteWhere a chair is in close proximity to a call-point this chair exit sensor can be hard-wired to its BME-03 controller (listed below). It will trigger an alarm along with an audible tone in the event of the resident leaving or falling from the chair. The A-BME-03 bedside control unit is a necessary accessory. For…
-
Cura1 Hardwired Bed Pad – 2626
|
1 minuteThis pressure sensitive bed exit sensor is usually placed under the Kylie mattress protector at shoulder position. Because it is intended to detect the removal of pressure it is necessary to operate in reverse to normal pressure mat devices whereby removal of pressure generates the alarm condition. Measuring 760 mm x 510 mm the low…
-
Bed Exit Sensor Beam – PIR Technology – Double
|
3 minutesClick here for In-Home Care option with Pager The PIRs project an invisible infra-red sensor beam along the sides the bed, which tapers down to meet the floor allowing care staff to walk around the end of the bed. If the resident swings a leg out of either side of the bed, the invisible beam…
-
Bed Exit Sensor Beam – PIR Technology – Single
|
3 minutesClick here for In-Home Care option The PIR projects an invisible infra-red sensor beam along side the bed, which tapers down to meet the floor allowing care staff to walk around the end of the bed. If the resident swings a leg out of the bed, the invisible beam is broken and an alarm is…
-
Hardwired Safe Life Monitor – For Chair, Bed & Floor Mats
|
1 minuteDetect as soon as a person lifts themselves up off the bed or chair. This low cost monitor is an optional accessory for hardwired floor sensor mat use but is essential for hardwired bed and chair exit sensors.
-
Safe Life Hardwired Chair Pad
|
1 minuteThe Safe Life Hardwired chair pad is a consumable item and available to purchase individually. This pad works with the Safe Life Chair pad Monitor and also the Cura1 monitor. It is an economical and durable pad that is intended to be used on or under a cushion. The chair pad is similar to the…
-
Safe Life Hardwired Foldable Bed Pad
|
1 minuteHardwired Safe Life Foldable Bed Pad The Hardwired Safe Life Foldable Bed Pad is a pressure sensitive bed exit sensor. It is usually placed under the fitted sheet or mattress protector at shoulder position. As it is intended to detect the removal of pressure, it is necessary to operate in reverse to normal pressure mat devices whereby…
-
Safe Life Foldable Floor Mat – Hard-wired
|
1 minuteYou can place the hard-wired floor mat on the floor beside the bed and simply connect to facility nurse call system at the over bed call point. The connecting lead has a built in double adaptor so the residents pendant cord can remain connected. As the resident steps on the mat, it generates an alarm…
