Your cart is currently empty!
Archives
-
Round Pendant with Display
|
2 minutesEmpower independence and ensure rapid help at the press of a button with the Safe-Life Round Pendant with Display.
-
Rectangular Pendant with Display
|
2 minutesStay independent and protected with the Safe-Life Rectangular Pendant with Display—Australia’s most advanced neck-worn falls-detection solution.
-
Additional Toilet Alarm Over Door Light with Piezo – FOR TWO CALL POINTS SHARING THE ODL
|
1 minuteToilet Alarm Over Door Light and Piezo Sounder – FOR TWO CALL POINTS SHARING THE ODL You can have multiple Toilet Alarm Call points linked to a single ODL – however this requires a protective isolation diode which is included in this version of the overdoor light. If you require more than two call points…
-
Toilet Alarm Call point ONLY (no overdoor light)
|
1 minuteThis is the same call point as supplied in the kit but without the over door light. It is for when there are two call points connected to a single over door light. In this instance the N-OD-LED-02-TB-PIEZO is required as it has two inputs which are isolated from each other. Versions with more than…
-
Plug in UHF Transmitter – Toilet Alarm
|
1 minuteThis UHF transmitter will transform the Toilet Alarm into a wireless system. Alarm calls will now be transmitted and displayed on either a Pager(s) or a fixed wireless Annunciator(s). Range is approximately 100 to 150 metres. The power source is delivered from the 12 V power associated with the Toilet Alarm so there is no…
-
Silicon Waterproof Gasket
|
1 minuteThe silicon water proofing gasket is designed specifically to fit snuggly between the Safe Life face plate and enclosures. It can also be used against a flat tile base to achieve IP64 water ingress rating.
-
Surface Mounting Kit – Toilet Alarm
|
1 minuteThe Toilet Alarm is supplied ready for flush mounting. Where this is not suitable the Surface Mounting Kit will provide a professional and aesthetically pleasing fit off. It consists of two parts, the 25mm (height) mounting enclosure and the purpose designed cover plate.
-
Spare Bed Exit PIR in line monitor (on/off switch)
|
1 minuteThe Single In-Line Monitor is typically purchased when converting a double sensor setup into two independent single systems. This configuration requires the additional purchase of a 12V power pack for each new single monitor. It also serves as a quick and easy replacement if an existing monitor becomes damaged. Featuring RJ click-in connections across all…
-
Spare Bed Exit Sensor Beam Power Pack
|
1 minuteThis 12V power pack features an RJ connection, making it a required component for the bed exit sensor system. It is commonly used as a quick replacement in the event of a damaged unit, or when a customer with a double sensor kit wishes to convert to two single sensor systems. In such cases, a…
-
Spare – Single Bed Exit PIR
|
1 minuteThis single PIR sensor is designed for customers who already have a single sensor beam kit and now require monitoring on both sides of the bed. Adding a second sensor, along with a curly cord, provides a simple and effective upgrade. Featuring RJ click-in connections, all components are easy to install and integrate seamlessly with…
