Cura1 ActiveCare Console – 3500

A$482.00

The Cura1 ActiveCare Console is suitable for surgeries, shared care homes, small facilities and larger facilities when paired with more consoles & pagers.

It is a wall mounted receiver / transmitter with large two-digit LED display. It supports pad, call, and door type alarms, and signals to pager.

SKU: A-ACTIVECARE-CONSOLE Categories: ,

Description

The Cura1 ActiveCare Console is suitable for surgeries, shared care homes, small facilities and larger facilities when paired with more consoles & pagers.

It is a wall mounted receiver / transmitter with large two-digit LED display. It supports pad, call, and door type alarms, and signals to pager.

Cura1 ActiveCare Console Features:

  • Large two-digit display for easy visibility at a distance.
  • Device type indication during active alarms.
  • Simple setup and programming (w/lock switch).
  • Battery backup protects against power failures.
  • Wall or desk mount.
  • 60 inputs – each input can indicate calls from bed, chair, mat and emergency buttons.
  • Separate indication for DoorAlert and reporting up to 16 doors.
  • Selectable “signal lost” supervision (tracking) of bed, chair and mat devices.
  • Adjustable volume.
  • Front panel alarm reset.
  • Can operate with slave 3500 ActiveCare Consoles.

Alarm tone

There are two alarm tones that can be selected. To change the alarm tone place the Console into programming mode.

Please refer to the full documentation or contact Safe-Life for instructions on how to do this.

Area code

If several Consoles are being used in a facility, then setting an Area Code will ensure pagers only receive alarms from their specified area.

Please refer to the full documentation or contact Safe-Life for instructions on how to do this.

Pause setting

The Console can be programmed to allow staff to pause all pad alarms for a designated time period.

Please consult the full documentation or contact your Safe-Life if you would like to enable this feature.

Delay Setting

The Cura1 ActiveCare Console can be programmed to automatically delay a pad alarm for a designated time period.

Please consult the full documentation or contact Safe-Life if you would like to enable this feature.

Call forwarding to a pager or slave console

The Console can be configured to forward calls (alarms) to the 3501 ActiveCare Pagers and to additional 3500 ActiveCare Consoles that have been configured as Slaves.

Download Brochure – 3500 ActiveCare Console

Quick start guide

Cura1 ActiveCare Console TECH SPECS:

  • Operating frequency: 433.92 MHz
  • Typical operating range: 25 m (dependent on environmental conditions)
  • Transmission power: 12 dBm
  • Power requirements: Regulated 12 Vdc plug pack & 6 x AA batteries (as battery backup in the event of a power failure – 4 hours).
  • Power consumption < 100 mA
  • Maximum number of unique transmitter identity codes: 60
  • Operating temp: 5°C to 40°C
  • Housing material: Durable ABS plastic
  • Dimensions (L x W x D): 180 x 145 x 36 mm
  • Weight: 480 g
  • Rel. humidity: < 90%

What’s in the Box

Setting Up

You may also like…

  • Cura1 iBeam

    Cura1 iBeam – Wireless Curtain Sensor – 2721

    Sale! A$197.10
    Add to cart